0.96″ OLED SPI/IIC I2C white/blue/yellow blue 0.96 inch OLED module 128X64 OLED LCD LED Display Module For ARDUINO

0.96″ OLED SPI/IIC I2C white/blue/yellow blue 0.96 inch OLED module 128X64 OLED LCD LED Display Module For ARDUINO

Fr7,000 Fr6,000

Interface:
VCC: 3.3-5V GND: Ground
SCL: Serial Clock
SDA: Serial Data

1 in stock

Category:

Description

Size: 0.96
Resolution: 128X64
Color: Blue Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430
series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight

PS:When you can’t light up the oled display, pls check the following issues:
1,Check the connection between OLED and Arduino;
2,Make sure you are using out provided libraries;
3,The default I2C/IIC address of the display should be 0x3C. We printed in model is 0x78 or 0x7A, but for AVR or MSP430 series (Arduino based on AVR), the IIC/I2C buffer is 7-bits, so, we should right shift 1-bit while using in Arduino or MSP430.
4,Check the VCC and GND pins is right be connected, never connect VCC to GND and GND to VCC, it will broke model less than a second.
5,Wipe the tin Solder part with alcohol.