MAX3232CPE MAX3232 DIP-16

MAX3232CPE MAX3232 DIP-16

Fr1,800 Fr1,500

Features

• RS-232 Bus-Terminal ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)

• Meets or Exceeds the Requirements of TIA/EIA- 232-F and ITU V.28 Standards

• Operates With 3-V to 5.5-V VCC Supply

• Operates up to 250 kbit/s

• Two Drivers and Two Receivers

• Low Supply Current: 300 μA Typical

• External Capacitors: 4 × 0.1 μF

• Accepts 5-V Logic Input With 3.3-V Supply

• Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s) – SN65C3232 (–40°C to 85°C) – SN75C3232 (0°C to 70°C) 

 

Description

This chip comes in a 16-pin DIP package. Requires four external capacitors. The MAX3232 can use very small 0.1uF ceramic capacitors – no more 10uF monsters! Operates from 2.7V to 6V so this DIP will work with your 5V projects or your 3V projects.

The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serialport connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slew rate.

Image result for max3232cpe datasheet