Fr63,000 Fr59,000

2 in stock


XBee (S2) 2mw XBee ZB (a.k.a. Series 2) module is used for embedded solutions providing wireless end-point connectivity to devices.This module incorporates the ZigBee PRO Feature with Set mesh networking protocol. Series 2 modules allow you to create complex mesh networks ,it does not offer any 802.15.4-only firmware; it is always running the ZigBee mesh firmware. this module has the lowest current draw of any Digi RF product. However, the infrastructure of a ZigBee network is more complex and requires more configuration to fully impliment. This module can give range of 40 meters indoor or 120 meters outdoor. This XBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 250kbps. They are designed for high-throughput(35kbps) applications requiring low latency and predictable communication timing.


  • Model code: XB24-Z7WIT-004
  • Operating Frequency: ISM 2.4 GHz
  • Antenna type: Wire antenna
  • Indoor/Urban Range up to 133 ft. (40 m)
  • Outdoor RF line-of-sight Range up to 400 ft. (120 m)
  • Interface: Serial(UART) at 1200 – 1 Mbps
  • Supply Voltage: 2.1 – 3.6 V
  • Transmit Current 40mA (@ 3.3 V boost mode enabled)
  • Receive Current 40mA (@ 3.3 V boost mode enabled)
  • Dimensions: 0.960” x 1.087” (2.438cm x 2.761cm)
  • Operating Temperature: -40 to 85º C (industrial)


  • Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
  • Number of Channels: (software selectable) 16 Direct Sequence Channels
  • Addressing Options: PAN ID, Addresses,Cluster IDs and Endpoints
  • 128 bit encryption
  • 8 Digital IO pins
  • AT and API Command Modes for configuring module parameters
  • Fully FCC certified
  • Transmit Power: 2 mw(3 dBm)
  • Receiver Sensitivity: -96 dBm
  • RoHS:Compliant)