-Could be connected to touch-screen MKS TFT28.
-Good to work with 12864LCD and MKS TFT touch screen.
-Net Weight:130g
-Dimensions:146.5*95mm

Note:

Pls confirm whether the positive and negative reversed before powering up again, if the user is due to reverse power and burn, and we do not guarantee such problems.
Do not plug in case of power motor drive easily lead to burn; do not adjust the current in the motor is running. The correct approach is to first disconnect the power, unplug the motor, and then re-power, adjust potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected.
MKS Sbase board must be inserted TF card can be used, it must be prepared to TF card, and be careful not to use poor quality TF card.
-Ancillary products is not including, need to purchase:
-4 stepper motor: 42 motor with line
-Limit switch 3: MKS limit switches
Package Included:

1* MKS SBASE V1.3 32-Bit Controller Panel Board
1*USB Cable

NOTE:
If you find any problem, please contact us at first, and our technical staff will help you to solve the problem at once. Thanks!