1 This module receive by single-chip Microcomputer code, if key value code is different as our remote control code, receiver module will not be controlled.
2 Receiver module dimension: L1.5*W1.0 cm with 2 fixed holes
3 Power voltage range: 3-5V
4 Receiver distance: 3-8 meters
5 Working Mode: Jog control For example: User press remote button, then relay turns on; user release the remote button, relay turns off
How the remote work?
Connect output: VCC( Power positive) GND(Power negative) OUT1-OUT4 represent outputs.
Indicate lights: LED light indicates the Signal( The panel have not mark positive and negative, please connect the cable as the our description. Thank you!)
4-Key remote control operate as below
1) Receiver module default is VOL, press power button, 4 outputs of the receiver module send VOH at same time and LED light on. release the power button, these outputs are VOL, LED lights off
2) Press CH1, OUT1 become VOH and LED light on, release CH1 output change to VOL, light off.
3) Press CH2, OUT2 become VOH and LED light on, release CH2 output change to VOL, light off.
4) Press CH3, CH4 are the same.