Description

specifications:

(1) Output: 15mA (5.0)

(2) Input: DC 4.2-6.0 v

(3) Output Signal: 1.5 ms ± 0.5 ms

(4) Size: 46 * 32 * 17MM

(5) Weight: 8g

(6) Adjustment: manual, automatic, and the median.

features: the ability to easily detect and configure the server for virtual spaces, jitter and median.

can be connected to two servos or ESC; MCU control, good stability and high accuracy. rotate the knob, direction can be detected.

if you connect electronic governor (brush or brush available), you can get rid of remote control devices for manual speed control, used to test the tone

engine speed or performance is very practical, no heavier to connect the remote and the receiver. is equivalent to a “hand

moving receiver “function, analog transmitters to play through the rudder button

instructions: Refer to the image below, after direction to the left, divided in the inferior part of three groups, which can be accessed three servants; Right single row of pins connected to the power, close to the edge is negative (see identification symbol), then the negative of the battery, be careful not to reverse, if the power supply is reversed it will burn IC; S corresponding identifiers for the pin, it does not matter. Power on, the blue light will illuminate at the same time, and only then light left side of the first, in order to manually adjust potentiometer test, press the button, the middle of lights, the standardized test; Third lights, automatic tests. ESC servos test and access connection, as you must first test the ESC motor!