Wireless Remote Control Switch Receiving Module Access Control Receiving Module Ceiling Light Receiving Module RX480A

Wireless Remote Control Switch Receiving Module Access Control Receiving Module Ceiling Light Receiving Module RX480A

Fr2,500 Fr2,250

20 in stock

Category:

Description

The RX480A receiver module is a UHF ASK receiver demodulator that supports ASK and OOK modulation. The receiver module has high sensitivity (-107dBm), low power consumption, and high dynamic range (more than 60dB). The module uses a highly integrated chip, built-in front-end low noise amplifiers, mixers, filters, frequency synthesizer and other circuits, can maximize the signal optimization.

According to different application requirements, RX480 series receiving modules have the following products according to the working voltage and working frequency:

2, product characteristics

Support ASK/OOK modulation method, the receiving sensitivity reaches -107dBm;

Operating frequency: 315 MHz, 433.92 MHz, bandwidth about ±150KHz;

Supply voltage input range: 2.2V-5.0V;

Good selectivity and stray radiation suppression capabilities, easy to pass CE/Fcc international certification;

Good local oscillator radiation suppression ability, can work together with multiple receiver modules (ie, single-shot and multiple-receiving) and does not interfere with each other. Using together does not affect the receiving distance.

Temperature range: -40-85°C Normal operation even in harsh ambient temperatures

Ultra-small size (customizable according to customer requirements).

3, the scope of application

Wireless power switch, socket

Remote control curtains, access control, electric vehicles

Security, monitoring system

Hotel room control

Smart home products

4, package and pin arrangement

Pin Module – RX480-A3(4) Series

5.electrical characteristics

6. Antenna size (This product does not include antenna. The following is only the suggestion of the antenna. If you need to use our antenna, please indicate when shooting. The unit price needs to increase 0.1 yuan/PCS, and we do not provide welding. welding)

General application

For general applications, the antenna can be directly marketed using the following specifications:

315M antenna

Antenna core diameter (including skin) 1.0mm, (excluding skin) 0.5mm;

Welding wire length 17.5mm, antenna wire length 9.5mm;

Antenna winding diameter (including skin) 5mm;

The number of winding turns is 15 turns.


433M antenna

Welding end wire length 10mm

The total length of antenna wire straightened 170mm;

The number of winding turns is 15 turns.

Specially enhanced

If a farther communication distance is required, an antenna of a general application type cannot be satisfied, and an enhanced antenna may be used to increase the receiving distance, as follows:

315M antenna

Antenna core diameter (including skin) 1.2mm, (excluding skin) 0.5mm;

Welding end wire length 20mm;

Antenna winding diameter (excluding skin) 6.8mm;

The number of winding turns is 13 turns and the length of the winding is 23.5mm.

433M antenna

Antenna core diameter (including skin) 1.0mm, (excluding skin) 0.35mm;

Welding end wire length 12mm;

Antenna winding diameter (excluding skin) 3.0mm;

The winding turns 26 turns and the winding length is 36mm.

7. Precautions

1. the product is a CMOS device, in the storage, transportation and use of the process should pay attention to electrostatic protection.

2. The device should be well grounded when used.