XBEE SHIELD

XBEE SHIELD

Fr11,000 Fr9,000

Specification
3.3V and 5V dual power output
3.3V and 5V IO compatible
USB 2.0 protocol
BitBang mode ready
Easily connected to a PC via mini USB cable
XBee-setting support software X-CTU

Description

The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee’s pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).

The Xbee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks).

FEATURES

  • Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets, can achieve a simple two crunodal ZigBee network.
  • It can be used for programming or communicating with board which basic Arduino but without USB interface
  • Easily connected to a PC via mini USB cable.
  • It is a fully Assembled shield without the XBee module